The Kopper Kart
1955 Chevrolet Pickup restyled by Barris Kustoms of Lynwood, California for George Barris. When George purchased the truck, it had already been sectioned 5 1/2 inches. George, who wanted use the truck as promotion vehicle for his shop, had big visions for the Chevrolet, and he had his brother Sam chop the top 4 inches. The body was then channeled 8 inches over the frame for an even lower appearance. The front was restyled by installing quad headlights. 1957 Mercury bumpers were used to assemble the two large copper-plated grille housings. It had a Cadillac Autronic Eye automatic headlight dimmer installed in the grilles center bar. The grille was finished of by filling the openings with a copper-plated mesh grille. Both front and rear were restyled by welding Studebaker splash pans together. They also pancaked the hood, added twin scoops and peaked the fenders. The stock six-cylinder was replaced by a 1954 Chevrolet Corvette engine. The The pickup truck featured accessories such as a portable TV set and a conventional phonograph in the bed. The record player was played back to the cab via interior speakers, while the portable TV was strictly a luxury item for Sunday picnics and outings. Once completed, the truck was named the Kopper Kart. Most of the trim on the truck that would have been chrome plated, was copper-plated instead.
In 1960, The Kopper Kart was advertised for sale by George Barris in the March 1960 issue of Motor Trend and Hot Rod Magazine. In the book Custom Cars of the 1950s Andy Southard has photos of the truck taken in March of 1960. According to the captions, this was the last time that Andy saw the car. Jim Skonzakes of Dayton, Ohio bought the truck from George in 1960. Jim owned it for a short while, before he sold it to Barons member Paul Blasberg of Mansfield, Ohio. The Kopper Kart was featured in Custom Rodder September 1961. By then it had + 40,000 miles on the odometer, and it was owned by Paul. Paul owned the truck in the early to mid 1960s. After having a lot of fun with it, the six-cylinder engine was pulled to make way for a 3/4 race Cadillac mill in preparation for running at the dragstrip. The truck was never reassembled again, and it was left outside to deteriorate. Paul's wife told John that it had really "gone to pot" from the rainwater getting through the exterior upholstery. A man came to the couple and offered to fix up the truck. Instead he ended up stripping it. As Mr. and Mrs. Paul Blasberg had already had their fun with the truck, they weren't too worried about the situation. Supposedly the bed and cab went separate ways.
Clones and Recreations
Magazine Features and Appearances
Motor Life June 1957
Rod Builder & Customizer August 1957
Custom Cars September 1957
Hot Rod September 1957
Custom Cars October 1957
Trend Book 156 Custom Cars 1958 Annual
Car Craft January 1958
Custom Cars January 1958
Car Craft March 1958
Rod & Custom April 1958
Custom Cars May 1958
Car Craft June 1958
Rodding and Re-styling March 1960
Custom Cars July 1960
Rodding and Re-styling July 1960
Motor Trend March 1960
Custom Rodder September 1961
Custom Rodder February 1962
Did you enjoy this article?
Kustomrama is an encyclopedia dedicated to preserve, share and protect traditional hot rod and custom car history from all over the world.
- Help us keep Kustomrama and history alive. For as little as 1 USD a month you can become a monthly supporter. Click here to learn more.
- Subscribe to our free newsletter and receive regular updates and stories from Kustomrama.
- Do you know someone who would enjoy this article? Click here to forward it.
Can you help us make this article better?
Please get in touch with us at firstname.lastname@example.org if you have additional information or photos to share about The Kopper Kart.
This article was made possible by:
SunTec Auto Glass - Auto Glass Services on Vintage and Classic Cars
Finding a replacement windshield, back or side glass can be a difficult task when restoring your vintage or custom classic car. It doesn't have to be though now with auto glass specialist companies like www.suntecautoglass.com. They can source OEM or OEM-equivalent glass for older makes/models; which will ensure a proper fit every time. Check them out for more details!
Do you want to see your company here? Click here for more info about how you can advertise your business on Kustomrama.